XS4 Wall Readers
SALTO peripheral products provide the ideal solution for those access points where online connectivity is needed, or where interaction with other systems or electric powered devices such as elevators, roller shutter doors or barriers is required.
XS4 integration board – SALTO Control Unit Adaptor
XS4 CUADAP | SALTO Control Unit Adaptor
The SALTO Control Unit Adaptor opens the integration with third party devices such as time and attendance systems. The Control Unit Adaptor is connected to the CU50ENSVN, sending to a third party device the data information that is requested. This means that you can access a door with all the convenience of SALTO and control your staff attendance at the same time. The interface with the external device can be RS232, OMRON and WIEGAND.
- To be used with CU5000, CU50EN or CU50ENSVN.
- Configuration by dip switches to control data to be read and the interface with the external device.
- Current required: 12V.
- Connection to the CU: UTP CAT5 cable.
- Connection to the external device: 4 pin block terminal.
- Data read by the CUADAPT: ROM CODE, TRACKS ON KEY,
- WIEGAND CODE.